share this page

Lean Sigma Green Belt

  • Course Code

    CR_ELSGB_7

  • Field of Study

    Mechanical and Manufacturing Engineering

  • Type of Course:

    Certificate

  • Type of Qualification:

    Special Award

  • Type of Study:

    Part time

  • Application Closing Date:

Course duration:

Nine full days over three months.

Admission Requirements:

Candidates should have at least three years' experience in a suitable working environment. The course is aimed at all personnel working within the design, manufacturing, transactional, sales or support environment.

It is suitable for management and team leaders through to shop floor personnel and employees directly involved in the process.

 

Course Schedule

 

Course summary

Lean Sigma is a very successful methodology for Service Design and Operational Productivity Improvement. For over ten years we have used a blend of Lean and Six Sigma philosophies to deliver proven education that has been highly successful. By engaging our students from client organisations in methodologies that sustain gains we have been successful in achieving client savings in excess of €100,000 per project / annum and, in many cases, much more. Unlike many other programs Lean Sigma is applicable to large or small organisations, in public and private sectors and in all types of service or production operations. This is borne out by our client list. Our student and mentoring client portfolio includes the Health Service Executive in the southern region, SR Technics, Glanbia, IBM, Laya Healthcare., Ashgrove Renewables, Stryker, Symantec Inc. CSO, VMWare, Pfizer, Janssen Biologics Ireland, Vention Medical, Irish Guide Dogs Lean Sigma is based on the elimination of waste and the reduction of variability in processing through engagement and respect for all staff.

Department(s)

Mechanical, Biomedical & Manufacturing Eng

CAMMS has many years of experience in working with organisations to help them make improvements using Lean Sigma techniques that have resulted in millions of euros in savings.  CAMMS engagement model works on the basis of helping organisations to Realise – React - Revise,

  1. Realise your current state customer issues
  2. React to the future state needs
  3. Revise as your customers develop their requirements

The Lean Sigma Green Belt course provides students with the tools and a structured approach to solving problems that will enable them to put a sustaining mechanism in place to ensure problems do not reoccur.

 

 

All part-time programmes at CIT will run subject to sufficient student numbers. Where a programme cannot proceed, applicants will be contacted and advised on alternative study options.

Students should note that Fees quoted relate to the academic year 2017-2018 only and are subject to change on an annual basis. Except where stated, course fees cover the cost of tuition only. 

Course fees must be paid before attending lectures.

 

 

Note: Places are limited for this course. Eligible candidates will be considered on a first come first served basis.

 

Course Fee

Regular Fee €2,250* (includes course notes and CIT exam fees)
*Discounts available for groups of three or more.

 

Duration & Delivery

Nine full days over three months. CIT Awarded Lean Sigma Green Belt (includes course notes and CIT exam fees). Optional two additional days for ASQ Exam preparation.

 

Testimonial

“SR Technics Airfoil Services in Cork repair commercial jet engine airfoils for some of the world’s most prestigious airlines and overhaul shops. The work carried out at the facility is exacting, critical and highly skilled.  When we began our lean journey we were fortunate to team up with CAMMS CIT. They have provided our staff with training and education on their courses including White Belt, Yellow Belt, Green Belt and Black Belt in the past ten years. We have found these courses to be very well fitted to our business and an excellent investment in our workforce.  The delivery, scope and content of the courses more than meet our needs and we have found that any suggestions by us or our staff for program improvement has always been taken on board. In addition, CAMMS CIT have been very willing to assist us with advice and expertise on many of our continuous improvement projects.”  Damien Carroll, Human Resources Manager of SR Technics Airfoil Services

“I found the course to be of huge benefit. The qualification is well recognised in the marketplace given its link with CIT & CAMMS. The flexibility and knowledge shown by the tutors was excellent. The course has helped me secure two contracts for work specifically related to the Green Belt content.” Eoghan Hegarty, Green Belt graduate

 

“I have to say that the course, (Green Belt), met my expectations and went further. I knew how to manage a project and the different steps every project goes through, but this course shows us really how to go through them, tools to use, and how to deal with unpleasant situations that may arise.” Orla O’Rourke, Green Belt graduate

 

“The Six Sigma Green Belt course was on my list of priorities for a number of years. I attended the course run by Mark Stockil in CIT and must say it exceeded my expectations in every way. I secured a position before the end of the course in a medical device organisation renowned for their expertise in continuous improvement. I was able to become a fully functioning member of staff in a short space of time due to the relevant and up to date material that was imparted to me on the course. This is a fantastic course that can be adopted for use across all industries. The Green Belt will extend your core competences and make you an attractive proposition for future employers.  Tony Foran, Green Belt graduate, unemployed when starting the course

 

"I applied for a place on the Certificate in Lean Six-Sigma Green belt through the Springboard programme. My background is in the multi-national pharmaceutical sector, and I was interested in this course, as I knew from my experience, that courses like this are very well received with-in the industry. I found the course content, relevant, practical and up to date. The tutors were very professional, helpful, enthusiastic, and accommodating to students like myself, who were out of the classroom for a long time. An interesting aspect for me was that many of my classmates were from different employment sectors, and they also found the course very beneficial. I found this course a huge confidence booster and hugely beneficial to my career progression." Fergal O'Connor, Green Belt graduate

 

 

 

Course Content
  • Introduction to Lean and Lean Sigma, DMAIC Methodology
  • Coordinating Project Teams
  • Defining the Project and setting goals
  • Variation and Measurement Techniques
  • Analysis of Process Data, Introduction to Statistical Tools
  • Cause and Effect, FMEA (Failure Mode & Effect Analysis)
  • Process Capability using SPC
  • Lean Concepts and Tools
  • Project Control, Measuring Success Factors
Awarding Body

CIT: 15 ECTS credits at Level 7 on the National Framework of Qualifications.

Candidates who complete the Lean Sigma Green Belt Programme will be encouraged to sit the American Society for Quality (ASQ) Lean Sigma Green Belt exam. (Examination fees payable directly to the ASQ).
 

 

  • Applications are now open for the below dates.
  • Please note that applicants will be required to pay an acceptance fee of €250 online if a place on a course is offered. This fee is deductible from the overall course fee
  • Please attach and upload any documents such as transcripts, CV, other details relevant to the application.
  • If you have any queries regarding the next intake please contact camms@cit.ie
Start Date 23/02/2017
Course Dates 9am to 5pm
23 February 2017, 24 February 2017, 10 March 2017, 07 April 2017,
13 April 2017, 27 April 2017, 05 May 2017, 19 May 2017, 01 June 2017
Start Date 20/09/2017
9am to 5pm
Start Date 03/11/2017
9am to 5pm
Start Date 22/02/2018
9am to 5pm

 

 

 

 

 

 

 

 

 

 

 

 

 

Centre for Advanced Manufacturing and Management Systems
camms@cit.ie
021 4326264